What aisle width do I need?

Aisle width is set by the lift truck: counterbalance trucks need approximately 12–13 feet, reach trucks 8–10 feet, and very-narrow-aisle equipment 5–6 feet. We confirm the requirement against your truck and load; aisle width has a major effect on storage density. For your Georgetown building, we use the actual floor plan and load data rather than a catalog assumption.

Can you handle design, supply and installation?

Yes. We handle design, supply and installation through experienced installation crews we schedule and manage. The system is anchored to the floor, aligned and capacity-tagged to the approved layout.

How are beam and frame capacities sized?

There is no single rack capacity: beam capacity is per pair, per level, while frame capacity depends on height and beam spacing. We size beams and frames from your heaviest pallet, and capacities go on load plaques.

What size pallet rack do I need?

For standard 48-inch-deep pallets, 42-inch-deep uprights are the usual starting point; common beam lengths are 96 inches for two 40-inch pallets, 108 inches, and 144 inches for three. Rack height follows clear height and forklift lift height. Measure your actual pallets, including overhang, before choosing dimensions.

How can I find my building's pallet position count?

The count depends on clear height, aisle width and the forklift you run. Our free CAD layout gives the exact pallet position count for the proposed configuration before you buy, using your building dimensions and actual pallet profile.

Drive-In Rack system inside a Kentucky warehouse

Georgetown, Kentucky

Drive-In Rack Layouts for Georgetown, KY

Name: Louisville Pallet Racks — Georgetown
Address: 6844 Bardstown Rd. Unit #2687, Louisville, KY, 40291, US
Telephone: (502) 521-1485
Price range: $$

An older riverfront building that was never laid out for modern pallet loads is the most common reason Georgetown warehouses call us. Drive-In Rack addresses that directly, reclaiming the positions a typical automotive assembly and supply layout in this market never uses.

We size the drive-in rack around your pallets, your lift trucks, and the clear height in your Georgetown industrial corridor building, factoring in aisles traded for lanes to push positions per square foot. You get a drawing and a line-item price for the Georgetown industrial corridor site, not a rough estimate. Call (502) 521-1485 and we will start a Georgetown layout.

(502) 521-1485

Why Georgetown Warehouses Work With Us

Warehouses in and around Cherry Blossom Way tend to be constrained by something specific: limited clear height, tight columns, or a dock that will not take a full truck at once. Those details decide a Georgetown design, not a standard drawing.

That is part of why drive-in rack fits Georgetown operations: lane dimensions drawn around your specific lift truck. A short design consult tells you quickly whether that tradeoff works for your SKUs, or whether another system carries more of the load in a Georgetown industrial corridor footprint.

We also keep the Georgetown drive-in rack layout on file, so adding a bay next year or extending a row does not start from scratch.

Free warehouse consultation

CAD layout with position counts

Installation by experienced crews we schedule and manage

Drive-in pallet rack lanes fitted with continuous rails

Drive-in warehouse racking loaded with bulk pallets

Operations We Rack Around Here

Nearby areas we work in regularly include Georgetown industrial corridor, Cherry Blossom Way, Triport Road area, Scott County business park.

Automotive assembly and supply

Metal stamping and fabrication

Plastics and injection molding

Logistics support

How Drive-In Rack Works

No aisles. The forklift enters the structure, and the floor holds more pallets per square foot than any other system.

Continuous rails, not beams

Pallets rest on rails carried by upright frames rather than individual beam levels, so a lane accepts pallet after pallet at the same elevation.

The truck enters the lane

The driver travels inside the bay to place or retrieve each load. Lane width, rail height, and mast clearance get dimensioned to that specific truck, not a generic one.

One open end or two

One open end gives LIFO and the highest density available. Two open ends give FIFO with slightly fewer positions, since each lane now needs clearance from both sides.

Guarding built into the design

Guide rails, column guards, and rail-end protection are part of the spec from the start to help keep trucks aligned and reduce contact with the structure.

What a Drive-In Rack Project Includes

The first step is a working list of what has to fit in your Georgetown space: pallet sizes, heaviest load, forklift reach, and how many SKUs need direct access versus drive-in rack depth.

Our design team turns that into a CAD layout with drive-in rack position counts, load capacity per level, and an itemized quote for the Georgetown site. Because this system trades on lane dimensions drawn around your specific lift truck, we usually model an alternative configuration on the same footprint, so you weigh positions against picking speed with real numbers rather than a sales pitch.

Drive-In Rack freight is staged to fit Triport Road area access. Experienced installation crews we schedule and manage build from the approved drawing, with the system anchored to the floor, aligned and capacity-tagged. We coordinate phasing around your Georgetown operation and keep one contact for later additions.

High volume of a small number of SKUs

Seasonal or buffer inventory held in bulk

Cold storage and freezer rooms where cube matters most

Product too fragile to floor-stack more than two high

Buildings where floor space, not height, is the binding constraint

Call (502) 521-1485

Recent Installations

Racking projects completed for warehouses across Greater Louisville and Southern Indiana.

Carton flow rack lanes installed beneath pallet rack bays

Drive-in pallet rack system installed in a warehouse

Tall selective pallet rack rows with wire decking

Selective pallet rack aisle with wire decking in a distribution center

New pallet rack rows installed in an open warehouse

Green and orange selective pallet rack rows along a warehouse wall

Multiple rows of selective pallet rack with wire decking

Pallet rack rows installed across a warehouse floor

Cantilever rack columns with orange arms installed against a wall

Push back pallet rack carts and rails in a cold storage room

View More Projects

Get a Drive-In Rack Quote for Your Georgetown Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (502) 521-1485.

Louisville Pallet Racks

6844 Bardstown Rd.

Unit #2687

Louisville, KY 40291

(502) 521-1485

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Louisville Pallet Racks regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.

Drive-In Rack Questions We Hear Most

Other Rack Types We Supply in Georgetown

Pallet Rack

Every pallet reachable, every time. The baseline we size everything else against.

View details

Pushback Rack

Two to six pallets deep from one aisle, without giving up much reach.

View details

Pallet Flow Rack

Load one side, pick the other, and let gravity enforce first in, first out.

View details

Cantilever Rack

Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.

View details

Carton Flow Rack

Cases advance to the picker instead of the picker hunting for cases.

View details

Nearby Areas We Also Serve

Our delivery and installation territory covers Greater Louisville and Southern Indiana, so one team can handle multiple buildings for the same company.

Drive-In Rack in Louisville Drive-In Rack in Jeffersontown Drive-In Rack in Shepherdsville Drive-In Rack in Elizabethtown Drive-In Rack in Shelbyville Drive-In Rack in Frankfort

View All Service Areas

Where We Work

Located in Louisville, we serve the entire Greater Louisville region with industrial pallet racks and warehouse storage solutions.

Louisville Pallet Racks

Address

6844 Bardstown Rd.
Unit #2687
Louisville, KY 40291

Phone

(502) 521-1485

Business Hours

Monday - Friday: 8:00 AM - 6:00 PM
Saturday: Closed
Sunday: Closed

Need Drive-In Rack in Georgetown?

Call (502) 521-1485 or request a quote and we will get a layout started.

(502) 521-1485